Hydroponics Gardening Is The Answer To All Your Problems

Hydroponics Gardening Is The Answer To All Your Problems

Browse through 1000′s of FREE gardening articles and videos

http://www.ultimategreenthumb.com

 

Hydroponics gardening is the perfect solution for anybody who wants a garden, but does not have enough space or dirt.

Hydroponics gardening is, simply put, a method of growing plants using a nutrient solution instead of dirt. With hydroponics gardening, you are able to grow beautiful flowers and delicious vegetables virtually anywhere you want. In addition, hydroponics gardening requires much less maintenance than a normal garden would.

In fact, you will usually spend less than five minutes a day maintaining your hydroponics garden. Every few weeks the nutrient solution will have to be replaced, but that too will only take a few minutes. While some heavy fruiting vegetables like tomatoes and peppers may not be able to thrive in the nutrient solution, almost all other types of flowers and vegetables will just fine in a hydroponics garden.

While hydroponics gardening might seem difficult to a person doing it for the first time, you will be able to quickly get the hang of it. Just like you need gardening supplies for a regular garden, you will need hydroponics gardening supplies for hydroponics gardening. The most common method of hydroponics gardening is the passive system. In the passive system, plants will sit directly in the nutrient solution.

Because the solution might cause the plants to rot if not oxygenated, all passive systems come with an aquarium air bubbler, which will oxygenate the nutrient solution. If you find the hydroponics gardening method that is right for you, you will soon be enjoying all the gardening hydroponics vegetables, flowers and fruit that you could possible want.

 

Using Retaining Walls in Your Garden Beautifying your garden by the construction of a retaining wall, behind which is a lawn or expanse of flowers, is not a difficult task. But, like all garden problems, it requires a certain amount of effort and care.

The retaining wall must be strong enough to hold back the pressure of a great weight of soil, and yet porous enough to allow drainage.

The most popular types of walls are built of stone, either dressed or rubble. In using stone for a retaining wall, there are two basic types of construction: dry-wall, which uses earth as a filler between the stones, and mortar, which uses cement as a bonding agent.

how Organic and Hydro-Organic Nutrients useful for hydroponics gardening?

diana H asks: how Organic and Hydro-Organic Nutrients useful for hydroponics gardening?

http://www.hydroasis.com/growingtips/hydro-organic-nutrients.shtml

The answer voted best is:

Answer by Barbie
Hello diana H,

Organic nutrients refer to substances with carbon molecules that are used by living organisms. All plants require the right amounts of organic nutrients such as vitamins, amino acids, and proteins for proper functioning.

Organic nutrients refer to substances with carbon molecules that are used by living organisms. All plants require the right amounts of organic nutrients such as vitamins, amino acids, and proteins for proper functioning.

The term “hydro-organic nutrients” is a combination of hydroponics and organic nutrients. Hydroponics refers to the practice of growing plants in solution of organic nutrients without using soil. Hydroponics is based on the principle that plants require soil only to extract nutrients. Hence, soil is not really necessary.

Simply put, hydro-organic nutrients are organic nutrients dissolved in a rich nutrient solution without using soil.

Hydro-Organic Nutrients

Hydroponic gardeners have to ensure that their plants receive the exact amount of hydro-organic nutrients for better growth. However, it becomes difficult to measure and monitor organic nutrients. Hence, hydroponic gardeners often buy commercial preparations of hydro-organic nutrients.

Choosing the Right Hydro-Organic Nutrients

You can create your own hydro-organic nutrients, but this will require a lot of experimentation on what works best. Commercial hydro-organic nutrients undergo testing for years to improve plant resistance to disease, growth rates, and most importantly, yield. Using premixed hydro-organic nutrients will save your time and provide better results.

The choice of hydro-organic nutrient product will depend on the crop you are growing and the stage of growth. Some hydro-organic products are specially designed for certain vegetables and fruits such as watermelons, tomatoes, squash, and grapes. Plants have different nutritional needs in the seedling and vegetative stages. The mix of nutrients may differ from stage to stage.

Plants also deplete certain organic nutrients faster than others. Hence, you need to select the right hydro-organic product that provides the ideal mix of nutrients and optimizes the uptake of organic nutrient.

Using Hydro-Organic Nutrients

Even if you buy premixed hydro-organic nutrients, it is important to experiment with the feeding schedule and proportion to get the best results. Many hydroponic gardeners mix two or three hydro-organic products to get high-quality flowers and vegetables.

Too much or too little hydro-organic nutrients can damage the growth of your flowers and vegetables. Some organic nutrients in excess quantities can be toxic for your plants. It is easy to flush out hydro-organic nutrients, which easily dissolve in water.

Add your own answer in the comments!

Powered by Yahoo answers!

got organic gardening? GARDEN PLANTING FUNNY DECAL

US $1.48 (0 Bid) End Date: Sunday May-20-2012 15:09:08 PDT Bid now | Add to watch list

Encyclopedia of Organic Gardening; Rodale; July, 1973

US $2.00 (0 Bid) End Date: Sunday May-20-2012 15:34:28 PDT Buy It Now for only: US $4.50 Bid now | Buy it now | Add to watch list

Which is better organic or hydroponics gardening?

Harley Brane asks: Which is better organic or hydroponics gardening?
I love gardening but I don’t have so much time to spend for gardening, my friend told me to go for hydroponics its good, and he suggest me one site http://www.hydroponics1.co.uk/ its all about hydroponics. hey guys suggest me which one is best?

The answer voted best is:

Answer by Dowlinggram
Both are good –just different ways of gardening. It is more expensive to set up a hydroponic garden because you need lots of equipment and a place to set it up. No matter which way you choose you have to make time when the garden needs attention not when you decide you have the time. Plants don’t wait for attention–they die

Add your own answer in the comments!

Powered by Yahoo answers!

September 1970 Organic Gardening and Farming Magazine

US $5.95 End Date: Monday May-21-2012 12:40:03 PDT Buy It Now for only: US $5.95 Buy it now | Add to watch list

June 1970 Organic Gardening and Farming Magazine

US $5.95 End Date: Monday May-21-2012 12:40:36 PDT Buy It Now for only: US $5.95 Buy it now | Add to watch list

Hydroponics gardening guide – preparing hydroponic nutrient solution, transplant seedlings and taking cutting for clones

Hydroponics gardening guide – preparing hydroponic nutrient solution, transplant seedlings and taking cutting for clones

How to preparing hydroponic Nutrient Solution

Nutrient solution is made of water with dissolved fertilizer. It is preferable to have good quality water to be mixed with the fertilizer, the amount of which is always indicated by the manufacturer. It is very important to check and adjust if necessary pH level of nutrient solution with liquid pH adjusters. Usually, pH level of the nutrient solution depends on the plant; however, most often it is between 6.0 and 6.5 for the majority of the starter cubes, with the exception being Rockwool, which needs pH level of 5.5 to 5.8. Fertilizing young plants, a gardener should use a nutrient solution as weak as ¼ to ½ of the full strength suggested by the manufacturer. Only plants older than two weeks can be fertilized by the full strength nutrient solutions. It is recommended to keep the growing medium moist, but not too wet or soaked with the hydroponics nutrient solution.      

]]>

How to Transplant Seedlings

The seedlings should be transplanted when the roots have grown out of the starter cubes. It is just necessary to place the seedling along with the starter cube on top or into the permanent growing medium, which can be any hydroponic growing medium or just soil. 

Notes in taking cutting for clones

Cutting, as a method of plants propagation, works well only if every step of the procedure is done correctly. Otherwise, experiments may result in devastating consequences. Though, when done properly, up to 95-100% of all cuttings grow successfully, it is still may be a good idea to take twice as many cuttings as needed, if you are making first steps in growing cuttings. 

 

One of the hints to increase chances in successful outcome is to use distilled water, while growing cuttings. Generally speaking, this is one of the most reliable and proven methods of plants propagation, suitable for most of the plants. Other examples of propagation techniques are dividing, air layering, and tissue culture. It is even possible to root cuttings without the use of any growing media in specific hydroponic systems. After forming the first roots, such cuttings are usually transplanted into any type of preferred growing media.

Hydroponics gardening guide -introduction to growing mediums and hydroponic supplies used in hydroponics

Hydroponics gardening guide -introduction to growing mediums and hydroponic supplies used in hydroponics

Growing medium is any medium, in which a plant can grow. Generally, hundreds of multiple types of growing medium exist: some are manmade and some are organic. Sometimes, even old AIR can work as a good growing medium for roots.

 

Defining the best growing medium is pretty challenging and disputable. It is a matter of personal likes, preferences and exact growing needs or requirements in most cases. It is like choosing a car: everyone picks the one, which suits his/her personal likes and requirements: someone chooses a small economic car for city traffic, and someone prefers powerful SUV to conquer sand and morass. Just like choosing a car depends on many factors, while choosing a growing medium it is also necessary to consider many variables, for example, what type of system is used, what plants you are going to grow and under what environmental conditions. Though there are a great variety of factors to consider while choosing a particular growing medium, it often comes to price, availability and personal preferences. 

]]>

The most common types of growing mediums as well the description of their key advantages, disadvantages, their basic characteristics and tips on general use are specified below.

 

Oasis cubes

 Expanded Clay Pellets

 Rockwool

 

Coconut Fiber

 Sand

 Gravel

 

Perlite

 Sphagnum Moss

 Water

 

Vermiculite

 Fiberglass Insulation

 Saw Dust

 

Soilless Mix(s)

 Air

 Lava Rock

Oasis cubes

Oasis cubes are lightweight cubes, which serves the best for plants propagation from seeds or cuttings. Pre-formed oasis cubes are commonly used by hydroponic gardeners. This type of growing medium features neutral pH level and can hold water very well.

Since oasis cubes are usually used at the first stages of plant growth, they are usually not larger than 2” x 2” inches in size. It is very easy to transplant such cubes into any type of hydroponic system, growing medium or even into the soil. 

Related Gardening Articles

Basic Indoor hydroponics Gardening Guide – Benefits and Types of Indoor Hydroponic Systems

Basic Indoor hydroponics Gardening Guide – Benefits and Types of Indoor Hydroponic Systems

Efficiency in comparison to traditional soil growing systems would be one of the major advantages. Commercial production and just plain hobbyists would find that moving from regular soil growing methods to the modern Indoor Hydroponic systems to be more beneficial. Freedom from uncontrollable variables such as the weather, climate and time of day would be the most important factor over traditional growing methods. Farmers in Middle East countries would be able to grow plants such as vegetables only previously grown in tropical countries. Light and amount of growth nutrients to be absorbed by the plants could be optimized for best results without wasting any resources. Plant care could be individualized as to the amount of nutrients and light they receive at any time of the day. Plants grown in pots or plots tend to reach a growth plateau, wherein they become root bound and transplanting them is the best solution. This may present the individual with a sense of frustration and could be messy. Expert advice and appropriate planning beforehand could eliminate such unwarranted difficulties experienced with soil based planting.

 

Expenses made at the start of the project can be offset by the advantages in the long run. Fertilizers with their ever rocketing cost are major source of expenses in plant cultivation. Plants only take the nutrients they can absorb so maximum nutrient absorption without the risk of putting too much fertilizers is eliminated. But the risk of putting too much nutrients which leads to root damage remains, so proper nutrient feeding is advised.

 

All in all, the hydroponic system of growing plants increases plant production and quality of the crops. Nutrients essential for plant growth are readily available, proper ratio and distribution is assured resulting to better efficiency. Pesticides and plant diseases can be avoided as no soil is needed. Soil is an ideal medium for infection and disease, so harm to both plant and the individuals are reduced. Expenses are also reduced as pesticides are eliminated so overall; cost effectiveness is enhanced and make hydroponics a more economical way of growing plants.

]]>

 

For the environmentalist, the hydroponic system of growing plants also presents a more desirable and alternative way of plant production. The effects of growing plants through this new system has proven to be less polluting as it totally removes the need for pesticides and leaves the soil free from contaminants. Scientifically tests also show that plants grown through the hydroponic system contain more vitamins and minerals compared to those grown through fields.

 

Productivity is also increased with the use of Indoor hydroponic systems. Limited spaces for plant cultivation are maximized because smaller pots are used. Indoor hydroponic systems utilize different types of automated watering systems like drip, pumps and other means, allowing for a low maintenance operation. Spaces not available for plant growing can be utilized and together with regular soil gardens or fields, maximize each growing season.

 

 

Types of Indoor Hydroponic Systems

 

Wick or NFT

The system most often used, operated and maintained with the outmost ease. It requires very little setup and maintenance. This is done by simply cutting a hole in the bottom of the pot and a wick is inserted. The wick’s other end connects to the water reservoir below the pot.

 

Reservoir or Ebb and Flow System

A growing medium is directly placed into a pan filled with water and nutrients. It is easy to maintain, the pans contents needs only to be replaced every few days in order to maintain an effective system. Root adsorption is maximized with root surface in contact with the water, oxygen and nutrients are readily absorbed.

 

Drip Systems

The most common of all systems, drip systems are the most likely choice of hobbyists and professionals alike. The nutrient solution is kept in a container below the plants and is distributed by a pump to each plant thru a drip irrigation system. One type would be the Recovery type system; excess nutrients are recycled and channeled back into the reservoir. Another would be the Non-recovery type where excess system is not funneled back into the system, one advantage of this is that is a low maintenance system. Ph and nutrient concentration remains stable but is not as economical as the recovery type system.

 

Aeroponic System

Technically, the aeroponic system is the most advance of the three. Plants are suspended either without a growth rock or growing mediums. This permits the plant to breathe more air through the roots. Nutrients and water are introduced by timed misting. Root health is maintained by a timer and is set at intervals of a few minutes.

 

Help your garden grow with

The Vegetable Gardener’s Bible (10th Anniversary Edition): Discover Ed’s High-Yield W-O-R-D System for All North American Gardening Regions: Wide rows, Organic methods, Raised beds, Deep soil

The invaluable resource for home food gardeners!

Ed Smith’s W-O-R-D system has helped countless gardeners grow an abundance of vegetables and herbs. And those tomatoes and zucchini and basil and cucumbers have nourished countless families, neighbors, and friends with delicious, fresh produce. The Vegetable Gardener’s Bible is essential reading for locavores in every corner of North America!

EVERYTHING YOU LOVED about the first edition of The Vegetable Gardener’s Bible is st

List Price: $ 24.95

Price:

Basic Indoor hydroponics Gardening Guide – Hydroponic Nutrient Solutions

Basic Indoor hydroponics Gardening Guide – Hydroponic Nutrient Solutions

Improper use of fertilizers is the common cause of many plant problems. Inadequate amounts cause weak and under nourished plants while an amount above desired quantities may burn and even kill the plant. Good judgment and decisions are required when a plant grows. Below are guidelines for applying nutrient solutions.

 

Hydroponic nutrient solutions are normally sold in concentrated forms. They are then added to the water supply with a specific ratio. Ideally, 150-600 parts per million consists a normal concentration of hydroponic solution. Normally sold in two or three parts because direct combination is not possible. Remember to mix nutrients into water first before combining, never combine two nutrients together.

 How Much Hydroponic Nutrient Solution?

 There are specific proportions for each plant type and phase of its growth. Advances in nutrient solutions have greatly improved the precision of concentration based on a plants growth stage. Hydroponic nutrient solutions are usually sold in “grow” or “growth” formulas for the vegetative phases and “bloom” or “flower” for the flowering phase of the growth cycle. Remember to switch to the bloom formula during the bloom stager to increase yields exponentially and max out your plants capacity.

]]>

In poor growing conditions weak nutrients are recommended. Low lighting, overheated gardens, crowding and root bound plants. Weak nutrients are also ideal for newly rooted cuttings and for transporting plants or when they are in the transition of growth cycles.

Normal, healthy plants can be used with regular strength solutions in ideal growing conditions. Increasing nutrient solutions could be utilized to enhance efficiency of your gardens. An ideal system such as high quality lights, proper aeration and ventilation when present is the only instance wherein you could increase the level of nutrient solutions to improve plant growth. Gradually increasing the nutrient solution is advised as not to burn the plant roots.

 

Various additives are also available for optimum plant growth. Maintain good grow logs or records of types of additives used, when applied and results. This enables you to measure its effectiveness in the future. If there are any negative effects with experimentation, flush or rinse your hydroponic system immediately.

 How to measure Hydroponic Nutrient Solutions

 Electronic conductivity of dissolved minerals in the water is the usual basis for determining nutrient solution. Parts per million (ppm) is the unit of measure. But this is just a general way of measuring conductivity in the solution and not the actual strength of individual minerals. This is the main reason why hydroponic nutrient solutions are sold as a mix of 3 parts. Once the desired mix is achieved it is very convenient to change the concentration to achieve proper conductivity.

Overuse of Hydroponic Fertilizers

 Flushing out your growing medium is the first intervention once any signs of over fertilization are observed this is to prevent further damage to the plant. Clean water is used for flushing until signs of nutrient deficiency are observed in the plant. Normal feeding and schedule is then resumed. Some hydroponic systems require a top down flushing to completely clean out the plant.

 

2 weeks before your expected date of harvest, flushing is recommended for the plant. It is done to leave your harvest free from the hydroponic nutrients solution taste. 

Hydroponics gardening guide – How to Prepare Starter Cubes

Hydroponics gardening guide – How to Prepare Starter Cubes

Starter cubes, used by hydroponic growers, as well as soil gardeners, are comfortable growing media for starting seeds. Made of inert material, starter cubes provide perfect support to the plant and its rhizomes. The cubes are capable of retaining water, but they do not supply a plant with any nutrients, unless the latter are dissolved in the water. Nowadays, there are 4 types of starter cubes: Organo-Cubes, Oasis cubes, Rockwool and “peat pots”. The most popular among the gardeners are the first three kinds of cubes (Organo-Cubes, Oasis cubes and Rockwool), while “peat pots” lose their popularity due to their tendency to accumulate too much water, which can spoil the seeds and the seedlings. Oasis cubes, Rockwool, and Organo-Cubes, on the other hand, retain water along with enough air, which prevents the medium to be too moist.

Preparing hydroponics starter cubes for the use depends on the type of the cube you have. For example, Organo-Cubes are ready for use, while Oasis cubes and Peat pots should be soaked in water (with pH adjusted to 6 – 6.5) before use. As soon as the cubes are saturated with water, they should be left to drain a bit, and then they are ready to be used. Rockwool is different, since it has high pH. Therefore, it should be soaked in water with pH adjusted to 5.0 in order for this acid solution to be balanced to the pH level required for the plants normal growing. These cubes should be soaked in water approximately for 24 hours, followed by the drainage prior to the use. 

Having done these easy manipulations, the seeds can now be planted. Small holes about ¼ to ½ inch deep should be made in the cube with a tip of a pencil or a pen. Then seeds may be put into the holes and covered with some cube material from around those small openings.

It is best to keep the seed cubes moist, but not wet, always preventing them from staying in the water. The cubes do not need light until the seeds germinate. Similarly, no nutrients are necessary for the plants until they have their first true leaves developed. In this case a diluted nutrient solution

Grow Lights in hydroponics gardening – Metal Halide (MH) grow lights

Grow Lights in hydroponics gardening – Metal Halide (MH) grow lights

Generating between 65 to 115 lumens of light per each watt of consumed electricity, metal halide grow light lamps are considered to have high efficiency. MH lights produce light, which is very close to the natural sunlight with the rich blue spectrum. Due to this, MH lamps support vegetative growing in the most desired way – when plants have many leaves on the stem with short internodes.

Structurally, metal halide lamp is a vacuum glass tube. There is also an arc tube inside, filled with mercury and other metals in iodine form. Under the influence of electric current, those metals start to generate light and heat intensively. Though metal halide bulbs can be either transparent or coated with phosphorus, the first type is more preferred for the indoor gardening, since it produces very bright light.

]]>

There are different sizes of metal halide lamps, starting from 70watts and finishing with 1500 watts. However 250w, 400w and 1000w are modifications, most commonly used in hydroponics systems gardening. In order to make MH light to work, it is necessary to use a ballast, designed for a particular bulb size. Ballast is, in fact, a transformer, which decreases voltage to some predefined amount.

The lamps can work only in the positions they were designed for. Those marked with BU or BD should be used only in vertical position; while those lamps, which carry HOR sign, are for horizontal application. Besides, there are also universal (U) lamps, which can operate in either position. 

There are also many different styles of metal halide lamps available on the market today. Along with typical or regular MH bulbs, there are also Super Bulbs, which can produce up to 10-12% more light than ordinary bulbs.

Regular metal halide bulbs should be replaced after about 18 months or 9500-10000 hours of use. Super bulbs are less durable and should be replaced more frequently – approximately after 12 months or 6500 hours of use. These recommendations apply if grow lights will work 18 hours daily.

Choosing Grow Lights for Hydroponics Gardening – Grow lights Types

Choosing Grow Lights for Hydroponics Gardening – Grow lights Types

Plants use light to convert it into energy during the process, called photosynthesis. Growth of the plant is directly dependant on the amount of light received. By the way, the amount and type of light depend on the particular plant and its stage of development. So, a good grow lamp is the one, which is chosen in accordance with the light requirements of the particular plant.

Light is essential for health of your indoor plants, but choosing a proper grow light may be challenging and always requires thorough considerations. Grow light fluorescent offers the benefits of high effectiveness, no heat generation and full spectrum of light. For comparison, incandescent bulbs also produce a lot of light, but at the same time they generate a lot of heat, which is not always beneficial for indoor plants.

Each stage of plant development requires a particular light. When the plant is in its growing stage during which stem, branches and leaves develop, it is the best timing to use metal halide lamps for they produce blue spectrum light. However, when plant forms flowers and fruits, it is better to use high-pressure sodium or HPS lamps, which provide red light spectrum. 

The only downside of MH and LPS lights is the heat generated by them. Heat is not good for plants and soil. To prevent overheating, special cooling fans may be required.

]]>

 diodes or LEDs, introduced in early 1920s, have debuted in hydroponic gardening as grow lights only recently. In comparison to metal vapor lights, LED lights offer a lot of benefits with the initial cost being their only disadvantage. However, these grow lights are more cost-effective in the long run, having the average life time of about 100 000 hours vs. 15 000 hours of other lights. Besides, LED lights consume less energy, providing energy saving up to 80% in comparison to fluorescents and metal vapor lamps. Furthermore, LED lights do not generate heat, and, therefore, they need no additional cooling and ventilation.

 In order to increase plant growth and productivity it may be necessary to use certain additional accessories, such as reflectors, which help to increase light intensity and make it more balanced, eliminating any “hot spots”.

 Another key component of the grow light system is ballast, which provides energy. While fluorescent light fixtures have built-in ballasts, the other types of grow lights, namely metal vapor and LED lights require remote or external ballasts. Digital ballasts are important components, so it’s better not to save money on them. It is recommended to choose domestically produced digital ballasts instead of old magnetic coil types or those imported from China. In addition to being more reliable, expensive digital ballasts are equipped with additional features, such as short circuit or defective bulb detection.

 Hydroponic gardening belongs to the most common techniques to grow plants and flowers with no land required. While building hydroponic system, sooner or later one faces the necessity to invest in high quality grow lights. A lot of people give their preferences to HID (high intensity discharge) lights equipped with digital ballast. These types of lamps provide the most natural light similar to sunlight, which is especially important for successful indoor plants growing. However, there are certain differences between HID lamps worthy to know.

 In general, five types of HID lights exist. They are mercury vapor, xenon short-arc lamps, metal halide, low-pressure sodium and high-pressure sodium lights. Among these metal halide and high-pressure sodium lights are the most preferred types.

Related Gardening Articles

Next Page »